Heavy Duty Industrial Workbenches

5 Day Delivery on selected workbenches and accessories - please see Green codes in table above. All other options are available on a 15 working day delivery.

• These heavy duty benches are suitable for applications such as engineering and manufacturing
• Strong fully welded steel construction from heavy duty 40 x 40 section with 50 x 50 square tube legs
• Framework is complete with a durable polyester powder coated finish in Dark Grey
• Available with a choice of steel plate, laminate, solid Beech or Linoleum worktops
• Full range of accessories enabling you to customise your bench are available
• Standard Workbench Height: 840mm suitable for standing or seated work
• Alternative heights are available: 760 and 920mm - P.O.A
• Maximum Load Capacity: 1200kg UDL
• Available to purchase as a Kit - Click here

Please Note: Images shows Industrial Workbench with Solid Beech worktop, single cupboard, triple drawer unit and a range of above bench accessories including the worktop fitted service duct, louvre panel, upper shelf, post fitted service duct, light / tool rail and lighting.

When purchasing Above Bench Accessories please remember to add Rear Support Posts (sold in pairs) to your basket to fit the accessories onto.

Worktop options:

Steel Plate Worktop:

The steel plate worktop is 2mm thick on top of a 25mm thick timber core. This is a heavier duty option, ideal for mechanics and industrial projects. It is extremely tough, durable, will not become oil soaked or cracked.

Solid Beech Worktop:

The solid beech worktop is 27mm thick. These worktops are a heavier duty option. They are resistant to damage which could be caused by sharp tools and high impact applications. This is an ideal worktop for workbench that will be used for tool work, DIY work and by woodworkers.

Laminate Worktop:

The laminate worktop is 20mm thick and a very durable surface suitable for general purpose applications. Laminate is very easy to wipe clean with good resistance to oil, grease, weak acids and mild alkalis.

Linoleum Worktop:

The Linoleum worktop is 20mm thick and a hard wearing surface to work on. It is a popular choice for workshops and laboratories. This is because it has resistance to diluted acids, oils an most conventional solvents, for example white spirit. It is also easy to wipe clean after use and therefore low maintenance. However, please note that Linoleum is not recommended if you are working with alkalis.

Sizing:

These workbenches are available in 3 different widths, each width offers a further 3 different depth options:

• Width: 1200mm

• W 1200 x D 600 x H 840 mm
• W 1200 x D 750 x H 840 mm
• W 1200 x D 900 x H 840 mm

• Width: 1500mm

• W 1500 x D 600 x H 840 mm
• W 1500 x D 750 x H 840 mm
• W 1500 x D 900 x H 840 mm

• Width: 1800mm

• W 1800 x D 600 x H 840 mm
• W 1800 x D 750 x H 840 mm
• W 1800 x D 900 x H 840 mm

Accessories Information:

We offer a full range of Above and Below bench accessories which enable you to totally customise your workbench to suit your exact needs. You can add these accessories to your basket using the drop down menus on this page. Simply select the worktop you require and the width of your workbench and the appropriate accessories will show in the drop down menus.

Don't forget to add the Rear Support Posts into your basket if you are purchasing above bench accessories The support posts are available in two heights: 760mm and 1180mm above the bench worktop. We recommend that for the Tilting LED Light or LED 3 Setting Light - when purchasing the Tool Rail Support you purchase the taller 1180mm high rear support posts.

Below Bench Accessories Details

• Single Drawer Unit: H220 x W420 x D420mm
• 3 Drawer unit: H435 x W420 x D420mm
• Cupboard Unit: H435 x W420 x D420mm
• Sliding Doors create large cupboard space - only available factory fitted