Cantilever ESD Workbenches

5 Day Delivery on selected workbenches and accessories - please see Green codes in table above.

All other made to order items are on 15 working days delivery. If you order items on 5 day and 15 day delivery your order will be despatched in one consignment at the later delivery date.

• Cantilever ESD Workbenches designed for use with electrical items and the electronic industries
• Industrial cantilever workbenches are suitable to be used as an assembly or repair bench
• Available with a Neostat or Lamstat worktop which are specifically for static controlled areas
• Welded tubular steel construction with square leg frames and worktop support channels for rigidity
• Framework is airflow drilled inwards therefore no nuts are required when assembling
• Hard wearing powder coated finish in Light Grey for a seamless appearance
• Choose from a range of static dissipative accessories including wrist straps and earth/ground leads
• A full range of above and below the bench accessories are also available
• Supplied with adjustable levelling feet for uneven surfaces
• Workbench Height: 840mm as standard
• 760mm and 920mm High versions are available - please contact our Sales Team
• Load Capacity: 250kg SWL* Evenly Distributed
• Manufactured in the UK

*SWL or Safe Working Load is a load or weight which, when applied to a structure and is evenly distributed across the area, will be safely supported without the fear of breaking or compromising the structural integrity of the workbench.

Please Note: Workbench in Image is shown with Accessories (sold separately)

Worktop Options:

Neostat Worktop:

The Neostat static dissipative worktop is 20mm thick and has a surface resistance of 10&sup5 - 10&sup7 ohms. It is a dual-layer worktop with a dissipative top layer and a conductive bottom layer that guarantee a safe path to ground. The worktop surface is made of rubber, which prevents components from sliding across the work surface and has non-glare properties.

Lamstat Worktop:

The Lamstat worktop is also 20mm thick but has a surface resistance of 10&sup6 - 10&sup8 ohms. This static dissipative worktop is made from plastic laminate which is durable and resistant to solder and heat. It is also largely resistant to chemicals and easy to keep clean and maintain.

Our static dissipative cantilever workbench is a popular purchase; being designed to withstand the majority of applications it meets most people's requirements.

Product Performance:

Lamstat and Neostat worktops conform with IEC 61340 standard.

Dimensions:

1200mm Width –

• W: 1200 x H: 840 x D: 750mm
• 1200 x H: 840 x D: 900mm

1500mm Width –

• W: 1500 x H: 840 x D: 750mm
• W: 1500 x H: 840 x D: 900mm

1800mm Width –

• W: 1800 x H: 840 x D: 750mm
• W: 1800 x H: 840 x D: 900mm

Design Features:

• This workbench is designed and manufactured from Cantilever construction - which is designed to give user maximum leg room
• The basic bench as described above has been designed to accept a full range of accessories starting with the below the bench range
• You can choose from a single drawer unit, triple drawer unit or cupboard which can be fitted in any position underneath the bench
• Each drawer is fitted on glide runners which allow for easy movement, can easily clip in and out, and only offer two thirds access to the drawer when fully open to prevent full drawers from tipping
• Drawers and cupboards can be located in any position along the length of the workbench
• Delivered in knock-down form

Accessories Information:

We offer a range of Above and Below Bench Accessories and ESD Accessories which you can add to your basket using our drop down menus on this page. Simply select the width of your workbench and which worktop you would like and the appropriate accessories will show below.

When purchasing any Above Bench Accessories please remember to add the Rear Support Posts to your basket. They are sold in pairs and are available in two heights (760mm and 1180mm). It is recommended that when purchasing the Tilting LED Light - 30 Watt, 3 Setting LED Light, Tool Rail or Light/Tool Rail Support you purchase the 1180mm high rear support posts.

Below Bench Accessories Dimensions:

• Single Drawer Unit: H220 x W420 x D420mm
• 3 Drawer Unit: H435 x W420 x D420mm
• Cupboard Unit: H435 x W420 x D420mm